Upon bringing your washing machine home, it is possible that the unit may not be level. In order to correct this issue, you will need to adjust the feet located on the bottom of the washer. If you are uncertain about how to complete this task, it can feel daunting at first glance. Fortunately for you though, we will provide a detailed guide with easy-to-follow steps so that you can achieve a perfectly leveled washing machine without any external assistance!
Collect tools and materials
Prior to commencing, it is necessary for you to possess some tools and materials.
An application for your phone or a bubble level tool, used to detect if your project is straight and balanced.
Pliers that can be adjusted to fit different sizes or shapes of objects.
Block of wood measuring two by four inches (used to provide support for the washing machine during the leveling process)
Getting ready
Ensure that the washer is unplugged and devoid of any contents before commencing. It’s prudent not to tinker with a washing machine full of water! Furthermore, in case there are any leaks or drips emanating from the device, take time to wipe them off before proceeding with leveling your appliance.
Afterwards, clear the area of furniture to ensure unobstructed movement. Assess for potential electrical hazards like tripped breakers or loose wiring that may pose a risk when handling bulky appliances such as washing machines and dryers.
If feasible, relocate your washer from the walls to allow sufficient room for leveling rods.
How do you level a washing machine
Extract the washer and ensure it is fully disconnected prior to examining the flooring beneath. Shift the washing machine ahead until you can see all of its underlying space. In case a plastic tray supports your appliance, shift both, including the entire container and washer, forward altogether.
Be on the lookout for any poorly installed foot pads and adjust them as necessary. Beneath your washing machine’s feet, you might find rubber anti-vibration pads that resemble furniture padding have become dislodged. To ensure stability of the appliance, it is crucial to have all four pads secured in their respective locations.
Inspect the quality of the flooring material, which ought to be durable and made from solid materials such as wood, tile, vinyl or laminate. Avoid placing carpeting on top of a washing machine. Use a level tool to ensure that the floor is even throughout. It goes without saying that an enduringly robust and well-kept floor is indispensible; one free from any signs of decay, water damage like mold formation or unsightly cracks in it would suffice for renting out your property with confidence!
Should it be required, remedy any issues with the flooring. For best results, start by taking out the floor covering before addressing and mending any damage to the deteriorated subfloor prior to reapplying a new finish. Occasionally, there could also be harm inflicted upon the underlying support beams.
After reinstalling, ensure to verify your washer’s level by checking it both from front to rear and side to side. In the case that its top is rounded, straight components like those along the control panel or along the side seams should be selected for precise measurements.
Ensure all new shims or leveling feet are secured before reassembling. Test the washer’s stability by rocking it sideways and backwards with the lid closed to confirm all four legs contact the floor.
If the back feet remain immobile and uneven, it indicates a floor-related problem. Hence, only if the front feet are not level should one make adjustments to ensure proper steps.
To elevate the front of the washer, support it with a helper tipping it backward. Then position a two-by-four block beneath its center and at an elevated level.
To modify the washer’s height, manipulate its feet. You can either use pliers or your hands to turn the front leveling feet clockwise for an increased elevation and counterclockwise for a lower stance relative to the ground surface. The floor might require different foot levels; hence, you need to adjust accordingly. Nonetheless, always ensure that each leg is securely attached to its base even after adjusting it as desired.
The act of testing the level washing machine
If you are new to using a washing machine, it’s likely been some time since your last test run. However, if this isn’t your first rodeo, these procedures should be well-known to you.
To begin, run a cycle and inspect for any signs of leaks, vibrations or noise. Afterward, there are additional tasks to complete:
Ensure that the tub is completely drained after every cycle. The presence of any residual water upon completion may signify an internal issue with your appliance or a possible blockage in its drainage hose, which must be rectified prior to further use!
Ensure that the access holes on top of the washer, where hoses connect with the motor/pump assembly mounted under the cabinet baseboard area next to the drain pan opening through which water flows out during spin cycles, are unobstructed. This is particularly critical if you plan to install it at a height higher than eye level and visibility into bottom areas may be limited due to cabinets blocking your view line – in order not to trap anything behind walls.
Does a washing machine need to be perfectly level?
To ensure optimal performance and longevity of your washing machine, it is imperative to have it positioned as close to perfectly level as possible. Here are the key reasons why leveling your washing machine matters:
Minimized Vibrations and Noise
During operation, a washing machine that is level provides stability. This reduces the amount of excessive vibration and noise, making it more comfortable to use with less disturbance.
Internal components may experience premature wear or damage due to excessive vibration, which is known as component protection.
Enhanced Efficiency
A washing machine that is not level can face difficulties in the spin cycle, resulting in inadequate cleansing and rinsing. Due to incomplete spinning potential of the appliance, clothes could turn out damper than anticipated.
Balanced loads guarantee equitable distribution of weight, thus preventing the machine from exerting an excessive amount of effort.
Increased Life Expectancy
Minimized Wear and Tear: Consistent vibration and imbalance have the potential to accelerate deterioration of different components in the washing machine, potentially resulting in frequent malfunctions.
Regular leveling can aid in keeping the machine running smoothly for an extended period, thereby decreasing repair needs and contributing to its overall maintenance.
Ensuring safety
By ensuring that your washing machine is leveled correctly, the likelihood of it “walking” or shifting during use decreases significantly. This reduces the risk of mishaps and harm to nearby objects and individuals.
If you need a level a washing machine in Montreal, contact Service Servotech
If your washing machine is causing excess vibrations or noise due to an uneven level, it’s crucial to have it leveled correctly for its optimal performance and durability. If you need expert assistance in Montreal, contact Service Servotech.
What makes Servotech the ideal choice for leveling your washing machine?
Servotech’s specialists with vast expertise can correctly level your washing machine.
They guarantee stable and efficient functioning of your washing machine, thereby minimizing the chances of future complications – Quality Service.
Prompt and efficient: Fast service to reduce inconvenience and minimize downtime.
A comprehensive examination is carried out to ensure the absence of any other underlying problems, in addition to leveling.
To achieve secure and expert leveling of your washing machine in Montreal, reach out to the Service Servotech specialists. Our proficient technicians will guarantee that your washer is steady and performing optimally, giving you confidence in our exceptional service quality.
Contact Us
Appliance Repair in Greater Montreal Area
Contact Form
Get in touch with us
For Your Convenience
By phone, you can reach us day or night.
You can also send us an email. By completing on-line information request form, we’ll have the information we need to reply in writing.
While you’re on our website, you can also chat with an appliance or air conditioning repair representative from Service Servotech Appliance Repair, who is well-informed and able to answer any questions
