Winter is coming, and if you care about your home appliances, then you know that winter is the worst time for them to break down. However, with the right knowledge and proper preparation, you’ll have peace of mind knowing you won’t have to worry about calling professional HVAC repair services. Read below to learn about our top five tips that you can use to get your heating system ready for winter.
Tip #1: Start by Changing the Filters
A typical HVAC system will have filters which you will have to change from time to time. Changing the filters is one of those maintenance practices you have to adhere to when considering making your system ready for the winter. With time, the filters do get clogged with dust and other debris which, if not removed, will hamper the efficiency of your system and increase operation cost. It is recommended that you change the filters once every six months, or any time you notice that they are clogged.
Tip #2: Ensure the Thermostat is Working Correctly
During the winter, most reported HVAC problems usually have something to do with the thermostat. Consequently, it is vital that you check that the thermostat is in good condition before the winter begins. The good news is that you don’t have to call a furnace repair expert in Laval to come and test it out for you. All you have to do is set the thermostat a couple of degrees higher, then wait to see if the heat kicks in. If that’s the case, then all is well.
Tip #3: Service Your Chimney
Chimneys can experience buildups that may end up getting them clogged, and thereby reducing the overall efficiency of your HVAC system. Before winter, it is vital that you have your chimney professionally cleaned and ready for the next heating season. Any heating repair technician should be able to help you with cleaning your chimney.
Tip #4: Test the Igniter Switch of Your Furnace
Don’t wait for the first snow to fall before you check if the igniter switch of your furnace is working, or else you may have to call a heat pump repair technician for assistance. To avoid any inconvenience, it’s recommended that—before winter arrives—you check your igniter switch to ensure that it’s functioning properly.
Tip #5: Check on the Health of Your Carbon Monoxide Detectors</h2.
Carbon monoxide is a silent killer, and these detectors are your last line of defense. This is especially true if you’re using a wood or charcoal heater. Test them during the fall to make sure that they’re placed properly and still in good working condition.